Worldwide shipping with UPS or your preferred agent

NCx1400 OEM

NCX1400OEM
Product information "NCx1400 OEM"

Note:

The NCx1400 OEM is not for sale yet. However, we expect to ship it in Q4, 2026. Please contact sales@hypex.nl for more information on the NCx1400 OEM.

The NCx1400 OEM is a full bridge Class D amplifier module based on NCOREx® technology. Positioned as a higher output power variant within the NCOREx® family, NCx1400 OEM builds on the design principles used in the NCx500 OEM.

Compared with the NCx500 OEM, the NCx1400 OEM provides increased output power, delivering at least twice the power into 4 Ohm. The full bridge configuration supports higher voltage swing and output capability while maintaining the performance characteristics associated with the NCOREx control architecture.

The NCx1400 OEM benefits from further optimisation of noise and total harmonic distortion relative to earlier NCORE based designs. These improvements are the result of refinements to the NCOREx® control loop and output stage implementation.

The module is designed to extend the NCOREx® product family and supports partial pin compatibility with other NCOREx® modules. This allows system designers to upgrade existing designs with limited changes to the surrounding hardware.

Like its sibling, the NCx500 OEM, NCx1400 OEM is also fitted with a user-selectable high quality buffer stage. Depending on system requirements, customers can choose to use the module with or without this buffer stage through on-board jumper connectors.

The NCx1400 OEM is intended for use in high power audio systems, including professional audio equipment and high end home audio applications, where increased output power, low noise and predictable electrical behaviour are required.

HIGHLIGHTS

  • • Low idle losses
  • • Extremely low distortion across the frequency and power range
  • • Exceptionally low output impedance for precise speaker control
  • • Extremely low noise for a pure audio experience
  • • Remarkably neutral and transparent sound reproduction

FEATURES

  • • On-board high-end buffer stage
  • • SMPS dependent High-Current/High-Voltage mode
  • • Built with thoughtfully chosen, superior-quality components

PROTECTIONS

  • • Overcurrent protection
  • • DC error detection
  • • Over- and undervoltage protection
  • • Over temperature protection
  • • Short circuit protection

POSSIBLE APPLICATIONS

  • • Home Theatre systems
  • • Power Amplifiers; for home and professional use
  • • Immersive Audio systems
  • • Multichannel Power Amplifiers
Output Power (2Ω): 1 x 1000W
Output Power (4Ω): 1 x 1400W
Output Power (8Ω): 1 x 1400W
Channels: 1
Distortion: 0.0005%, 20hZ < f < 20kHz. Pout = 1W
Output Noise: 7 µV
Power Bandwidth: 20Hz - 35kHz
Frequency Response: DC 70kHz +0/-3dB. All loads
Power Supply Voltage: 90HV+/- (Max)
Idle Power: less than 10W (Max)
Output impedance: 250µΩ
Compatible SMPS: SMPS3kA400, SMPS3kA700, SMPS1200A400, SMPS1200A700
Technology: NCOREx®

Hypex icon Recommended additional products

SMPS1200A400
The SMPS1200 is a high efficiency Safety Class 2 switch mode power supply designed for use with UcD™, NCORE® and NCOREx® amplifier modules. The unit is intended for audio systems that require stable power delivery across a wide load range in a compact and lightweight format. The power supply includes an overcurrent protection mechanism that limits output current during temporary overload conditions. It also provides symmetrical auxiliary outputs and a control interface for operation with UcD™, NCORE® and NCOREx® amplifier modules. The SMPS1200 is designed to achieve low levels of radiated and conducted electromagnetic interference. The topology and layout are optimised to meet EMI requirements commonly associated with professional and high end audio applications. The power supply supports a selectable input voltage range, allowing operation with different mains supply specifications. This supports use in international applications with varying power grid standards. SMPS1200 is a 2-quadrant full bridge rectifier, making it possible to supply single ended class d amplifiers. The SMPS1200 complies with applicable safety and performance standards and is certified for use in professional audio equipmen HIGHLIGHTS • High efficiency • Small form factor • Low EMI FEATURES • 2-quadrant full bridge rectifier • Selectable input voltage range • External controlled operation • 4 variants available: A100 / A180 / A400 / A700 PROTECTIONS • Advanced Overcurrent protection • Over temperature protection • DC detection input POSSIBLE APPLICATIONS • Active Loudspeakers, for home and professional use • Line Array and Immersive Systems • Power Amplifiers, for home and professional use • Multichannel Power Amplifiers • Home Theatre Systems POSSIBLE APPLICATIONS • Active Loudspeakers, for home and professional use • Line Array and Immersive Systems • Power Amplifiers, for home and professional use • Multichannel Power Amplifiers • Home Theatre Systems Note: NCORE® and NCOREx® amplifier modules are not available for DIY customers.

SMPS1200A700
The SMPS1200 is a high efficiency Safety Class 2 switch mode power supply designed for use with UcD™, NCORE® and NCOREx® amplifier modules. The unit is intended for audio systems that require stable power delivery across a wide load range in a compact and lightweight format. The power supply includes an overcurrent protection mechanism that limits output current during temporary overload conditions. It also provides symmetrical auxiliary outputs and a control interface for operation with UcD™, NCORE® and NCOREx® amplifier modules. The SMPS1200 is designed to achieve low levels of radiated and conducted electromagnetic interference. The topology and layout are optimised to meet EMI requirements commonly associated with professional and high end audio applications. The power supply supports a selectable input voltage range, allowing operation with different mains supply specifications. This supports use in international applications with varying power grid standards. SMPS1200 is a 2-quadrant full bridge rectifier, making it possible to supply single ended class d amplifiers. The SMPS1200 complies with applicable safety and performance standards and is certified for use in professional audio equipmen HIGHLIGHTS • High efficiency • Small form factor • Low EMI FEATURES • 2-quadrant full bridge rectifier • Selectable input voltage range • External controlled operation • 4 variants available: A100 / A180 / A400 / A700 PROTECTIONS • Advanced Overcurrent protection • Over temperature protection • DC detection input POSSIBLE APPLICATIONS • Active Loudspeakers, for home and professional use • Line Array and Immersive Systems • Power Amplifiers, for home and professional use • Multichannel Power Amplifiers • Home Theatre Systems POSSIBLE APPLICATIONS • Active Loudspeakers, for home and professional use • Line Array and Immersive Systems • Power Amplifiers, for home and professional use • Multichannel Power Amplifiers • Home Theatre Systems Note: NCORE® and NCOREx® amplifier modules are not available for DIY customers.

SMPS3kA400
The SMPS3K stands out as a high power, high-efficiency Safety Class 1 switch mode power supply meticulously crafted for seamless integration with our UcD™, NCORE® and NCOREx® amplifier modules. Its key attributes include superior efficiency across the entire load spectrum, an exceptionally compact form factor, lightweight design, and minimal radiated and conducted electromagnetic interference (EMI). Adding to its capabilities, the SMPS3K incorporates advanced overcurrent protection. In the event of a temporary overload, it restricts the output current. Only if the overload condition persists for an extended period does the supply transition into hiccup mode, maintaining this state until the overload condition dissipates. This feature, coupled with large primary electrolytic buffer capacitors, enables the supply to deliver high dynamic headroom power to the connected amplifier. Moreover, the SMPS3K includes a symmetrical auxiliary output and a control circuit seamlessly interfacing with our UcD™, NCORE® and NCOREx® amplifier modules. Activation for routine operation or deactivation during a critical fault is managed through built-in actuators, providing a reliable safeguard. From the initial design phase to the final implementation, the SMPS3K undergoes optimization to achieve the lowest possible EMI signature, meeting the stringent requirements of the most demanding audio applications. The SMPS3K is designed with a selectable input voltage range, allowing it to accommodate various power input specifications. This flexibility enhances its adaptability to different regions and power grid configurations, making it a versatile choice for international applications. The SMPS3K complies with relevant industry standards and certifications, ensuring that it meets the highest benchmarks for quality, safety, and performance. This commitment to standards reinforces its reliability in professional audio applications. Relevant standards: The SMPS3A400 and SMPS3KA700 revision 1000 and higher fulfil the requirements of: IEC60065:2014 + A11:2017, IEC62368-1:2014 + A11:2017, UL62368-1:2014 Ed.2 and CSA C22.2#62368-1:2014 Ed.2. The SMPS3KA400 and SMPS3KA700 are ETL listed components for the USA (UL62368-1:2014 Ed. 2) and Canada (CSA C22.2#62368-1:2014 Ed.2). HIGHLIGHTS • High efficiency • Small form factor • Low EMI FEATURES • Selectable input voltage range • Remote controlled operation • 2 variants available: A400 / A700 PROTECTIONS • Advanced Overcurrent protection • Over temperature protection • DC detection input POSSIBLE APPLICATIONS • Active Loudspeakers, for home and professional use • Power Amplifiers, for home and professional use • Line Array and Immersive Systems • Home Theatre Systems • Multichannel Power Amplifiers Note: NCORE® and NCOREx® amplifier modules are not available for DIY customers.

SMPS3kA700
The SMPS3k is a high power, high efficiency Safety Class 1 switch mode power supply designed for integration with UcD™, NCORE® and NCOREx® amplifier modules. The power supply includes an overcurrent protection mechanism that limits the output current during temporary overload conditions. If an overload persists, the unit enters hiccup mode and remains in this state until the overload condition is removed. Large primary electrolytic buffer capacitors support short term peak power delivery to the connected amplifier modules. The SMPS3k follows the same design principles for safety, quality and electrical performance as other power supplies in the SMPS family, including the SMPS400 and SMPS1200. HIGHLIGHTS • High efficiency • Small form factor • Low EMI FEATURES • Selectable input voltage range • Remote controlled operation • 2 variants available: A400 / A700 PROTECTIONS • Advanced Overcurrent protection • Over temperature protection • DC detection input POSSIBLE APPLICATIONS • Active Loudspeakers, for home and professional use • Power Amplifiers, for home and professional use • Line Array and Immersive Systems • Home Theatre Systems • Multichannel Power Amplifiers Note: NCORE® and NCOREx® amplifier modules are not available for DIY customers.

Welcome!