SMPS1200A400
H02U004319
Downloads
CAD drawings
documentation
Product information "SMPS1200A400"
The SMPS1200 power supply is a 1200W high efficiency switch mode power supply specially designed to be used in combination with our range of UcD and NCORE® amplifier modules.
APPLICATIONS:
- Supply for single or multiple amplifiers of the UcD and NCORE® Family
HIGHLIGHTS:
- High efficiency
- Selectable input voltage range
- Extremely small form factor
- Low EMI
- Comply with IEC62368-1
GENERAL FEATURES:
- Advanced over current protection
- Remote controlled operation
- Low weight
- Compact
- Fixed output voltage (4 versions available)
ELECTRICAL FEATURES:
- High Line Input Voltage: 200-240Vac +10%
- Low Line Input Voltage: 100-120Vac +10%
- Output Voltage: 2x63Vdc
- Max. Output power: 1500W
- Max. Output power: 1200W @20Hz
- Switching Frequency: 100kHz
CONTENTS OF PACKAGING:
- SMPS1200A400
- Manual
| Family: | SMPS Family |
|---|---|
| Automatic input voltage selection: | No, Selectable with jumper |
| Mains voltage input: | 230V / 115V |
| Max Output Power: | 1500W |
| Max Output Power @20Hz: | 1200W |
| SMPS Voltage +/-: | 2 x 64Vdc |
Recommended additional parts
UcD250LP OEM
The UcD250LP (Low Profile Low Profile OEM version) amplifier module is a self-contained high-performance class D amplifier intended for a wide range of audio applications, ranging from Public Address systems to ultrahigh-fidelity replay systems for studio and home use. Chief distinguishing features are flat frequency response irrespective of load impedance, nearly frequency-independent distortion behaviour and very low radiated and conducted EMI. Control is based on a phase-shift controlled self-oscillating loop taking feedback only at the speaker output.APPLICATIONSMonitor loudspeakers for recording and mastering studiosMultichannel systemsPublic Address systemsHome theatre systemsActive loudspeakersGENERAL FEATURESRuns on unregulated +/- railsPop-free start and stop controlDifferential audio inputOvercurrent and overvoltage protectionHIGHLIGHTSFlat, fully load-independent frequency responceLow output inpedanceVery low, frequency-independent THDVery low noiceFully passive loop controlConsistent top performer in listening trailsCONTENTS OF PACKAGINGUcD250LP OEM amplifier moduleManual
UcD400 OEM
The UcD400 OEM amplifier module is a self-contained high-performance class D amplifier intended for a wide range of audio applications, ranging from Public Address systems to ultrahigh-fidelity replay systems for studio and home use. Chief distinguishing features are flat frequency response irrespective of load impedance, nearly frequency-independent distortion behaviour and very low radiated and conducted EMI. Control is based on a phase-shift controlled self-oscillating loop taking feedback only at the speaker output.APPLICATIONSMonitor loudspeakers for recording and mastering studiosAudiophile power amplifiers for professional and consumer usePublic Address systemsHome theatre systemsActive loudspeakersFEATURESRuns on unregulated +/- railsPop-free start and stop controlDifferential audio inputOn-board clipping detectionDC-fault detectionOvercurrent and overvoltage protectionPower supply voltage: +/- 45-73VUnit shuts down when either rail exceeds 75VOutput current limits at 20AOutput power: 400Wrms @ 4OhmHIGHLIGHTSFlat, fully load-independent frequency responceLow output inpedanceVery low, frequency-independent THDVery low noiceFully passive loop controlConsistent top performer in listening trailsCONTENTS OF PACKAGINGUcD400 OEM amplifier moduleManual
UcD400LP OEM
The UcD400LP (Low Profile Low Profile OEM version) amplifier module is a self-contained high-performance class D amplifier intended for a wide range of audio applications, ranging from Public Address systems to ultrahigh-fidelity replay systems for studio and home use. Chief distinguishing features are flat frequency response irrespective of load impedance, nearly frequency-independent distortion behaviour and very low radiated and conducted EMI. Control is based on a phase-shift controlled self-oscillating loop taking feedback only at the speaker output.APPLICATIONSMonitor loudspeakers for recording and mastering studiosMultichannel systemsPublic Address systemsHome theatre systemsActive loudspeakersGENERAL FEATURESRuns on unregulated +/- railsPop-free start and stop controlDifferential audio inputOvercurrent and overvoltage protectionHIGHLIGHTSFlat, fully load-independent frequency responceLow output inpedanceVery low, frequency-independent THDVery low noiceFully passive loop controlConsistent top performer in listening trailsCONTENTS OF PACKAGINGUcD400LP OEM amplifier moduleManual
Cable set SMPS1200
The cable set SMPS1200 is a complete set of cables to connect the SMPS1200A180, SMPS1200A400 or the SMPS1200A700