NCx252MP

The Cable set NCxxxMP is a complete cable set to connect the NCxxxMP amplifier to your application. Note: For the connection of the NC100HF please refer to the "Cable set NC100HF". NCore signal cable not included and not needed with the NCxxxMP amplifier range.

This board is specifically designed to make it easy to evaluate the new NCxxxMP series mains powered NCORE modules. Furthermore, the NC100HF can be easily connected. All necessary control IO's and supplies are easily accessible via test pads for evaluation. The evaluation board comes with 10mm nylon spacers which can be used to mount the board using M3 screws. All necessary interface cables are included. The signal, speaker and mains cables are open ended, meaning that you are free to connect it in with your own connectors in your own way. Features • Makes it easy to evaluate the NCxxxMP series with the optional NC100HF • PS Enable switch • Ch 1-2 mute switch (also mutes ch3 by design) • H-Box connector • H-Bus connector • NC100HF half H-Box connector Included • A breakout PCB to quickly evaluate the NCMP series • Z10A25L1 - 25cm 10 pole JST to interface between NC100HF and NCMP • Z10C12L1 - 12cm 10 pole Hypex Bus ribbon cable • Z16C14L1 - 14cm 16 pole Hypex Box ribbon cable • Z8C10L1 - 10cm 8 pole Hypex Half-Box NC100HF ribbon cable • Z2A20L7 - 20cm JST VHR-2N open ended NC100HF speaker cable • Z4A20L7 - 20cm JST VHR-4N open ended NCxxxMP speaker cable • Z4B50L2 - 3x 50cm NCORE Molex Microfit to open end signal cable • Z2A30L1 - 30cm JST VHR-3N open ended mains connection cable

The NCx102EXT is an NCOREx® based Class D amplifier add on module for the NC-MP / NCx-MP series. It is intended for use in active loudspeaker systems as an additional amplifier channel, optimised for mid and high frequency reproduction while supporting full audio bandwidth operation. The module is powered directly from the host NC-MP or NCx-MP module via the Hypex Channel Extension interface. It supports a wide input voltage range compatible with the complete NC-MP / NCx-MP product range and does not require an external power supply. The NCx102EXT incorporates a self contained NCOREx® Class D amplifier. The design provides a flat frequency response independent of load impedance and maintains consistent distortion behaviour across the operating range. Radiated and conducted electromagnetic interference is controlled through circuit topology and PCB layout. Control is based on a phase shift controlled self oscillating loop with feedback taken directly at the loudspeaker output. This architecture supports stable operation and predictable electrical behaviour when integrated into multi channel active loudspeaker systems. The NCx102EXT is designed to expand NC-MP and NCx-MP based designs with additional amplifier channels, supporting two-way, three-way or four-way active loudspeaker configurations where an additional midrange or high-frequency channel is required. Highlights • High efficiency • Flat, fully load-independent frequency response • Low output impedance • Very low, frequency independent THD • Very low noise Features • NCOREx® Technology • NCx-MP Add-on • External controlled operation • Specifically designed as channel extension for our Mains Powered NCORE® and NCOREx® modules Protections • Advanced overcurrent protection • Exessive DC protection • Short circuit protection • Over temperature protection Possible applications • Monitor loudspeakers for recording and mastering studios • Public address systems • Active loudspeakers

Step into the realm of high-grade audio with our series 3, mono/3-way DSP solution, a gateway to a high-grade audio experience like never before. Engineered with precision and passion, this board, built on the Analog Devices ADAU1452, beckons audiophiles to enter the world of high-grade audio perfection. Crafted to perfection, the DSP3-213 is optimized for use with our mains-powered NCORE® Family of amplifier power bricks. The marriage of cutting-edge technology and meticulous design ensures unparalleled audio quality, setting new standards in the pursuit of sonic excellence. Elevate your audio journey by expanding the DSP3-213’s capabilities with optional boards such as the DIGin3-322 for digital inputs or the SUBin3-110 tailor-made for subwoofers. This modular design ensures adaptability to your evolving audio needs, allowing you to create a personalized audio system. Whether you’re aiming for a full-scale home theater experience or a refined stereo setup, the DSP3-213 adapts to your aspirations. Immerse yourself in the power of customizations with the HFD (Hypex Filter Design) software. The DSP3-213 supports a wide array of IIR and FIR filter options, enabling you to fine-tune the DSP behavior and filtering to meet the unique demands of your audio environment. From crystal-clear highs to powerful lows, every nuance of your audio is sculpted to perfection. Envision a premium stereo or 2.1 system by configuring multiple DSP3-213 boards in a master-slave setup. This innovative configuration unlocks the full potential of your audio setup, delivering an immersive and captivating auditory experience that transcends traditional boundaries. Whether you’re a discerning audiophile or a professional sound engineer, the DSP3-213’s versatility elevates your audio ambitions. Store and recall different presets effortlessly. The DSP3-213 allows you to save varied filter settings, inputs, and volume offsets, ensuring seamless transitions between different audio environments. This flexibility caters to the diverse preferences of audiophiles, putting the power of audio personalization in your hands. Effortlesly switch between movie nights and music sessions with presets that enhance every experience. Experience intelligence in audio with features like Auto-signal-detect and adjustable standby settings. These intuitive functionalities ensure that your audio system seamlessly adapts to your needs, providing an uninterrupted and enjoyable listening experience. The DSP3-213 isn’t just a device; it’s a partner in your quest for audio perfection, intelligently adapting to your preferences. The same powerful DSP3-213 platform is the heartbeat of our Fusion Amplifier Family. Immerse yourself in a world where innovation meets performance, and redefine your audio expectations with the Fusion Amplifier Family. Each Fusion amplifier embodies the same commitment to excellence, ensuring that your audio experience remains consistently exceptional. Highlights • Three channel active filtering • One FIR (4500 taps) or three (1500 taps per channel) per preset • Compatible with NCMP and NCAS series • Three programmable presets Features • Configurable Soft clip limiter  • IIR & FIR capable  • Programmable with Hypex Filter Design (HFD)  • Automatic source selection  • Automatic signal detection  • Optional IR remote control  Possible applications • High-end consumer audio • Active loudspeakers • Subwoofers • PA systems • Studio monitors

The DSP3-224, a new creation in our Series 3 lineup, redefines the standards of audio excellence. Engineered with precision and ingenuity, this stereo/4-way DSP solution is a beacon of innovation, poised to elevate your audio experience. With the advanced ADAU1452 and optimization for seamless integration with the Mains Powered NCORE® Family of power amplifier bricks, the DSP3-224 is not just a product; it's an auditory masterpiece. Tailored for versatile applications, the DSP3-224 boasts robust DSP functionalities, making it an exceptional choice for crafting high-quality audio applications. Whether you are immersing yourself in the nuances of a stereo setup, pushing the boundaries of a 4-way speaker system, or exploring the possibilities of a 2.1 loudspeaker configuration, the DSP3-224 consistently delivers an unparalleled level of pristine audio that transcends expectations. Immerse yourself in the power of customizations with the HFD (Hypex Filter Design) software. The DSP3-224 supports a wide array of IIR and FIR filter options, enabling you to fine-tune the DSP behavior and filtering to meet the unique demands of your audio environment. From crystal-clear highs to powerful lows, every nuance of your audio is sculpted to perfection. Future-proof your audio system with the DSP3-224 by enhancing its capabilities with the optional DIGin3-322 digital input board. This modular approach allows you to adapt and grow your audio setup as your needs evolve, ensuring a flexible and scalable solution for even the most discerning audiophiles. Configure outputs effortlessly for Bridge-Tied Load (BTL) operation when connected to a 2-channel amplifier. The DSP3-224's intuitive design ensures a seamless and straightforward integration process, providing you with the flexibility to optimize your audio setup for maximum performance. The DSP3-224 empowers you with a suite of intelligent features, including Auto-signal-detect, adjustable standby settings, and EQ functionalities. Experience a level of control that puts you in the driver's seat, allowing you to create the perfect active speaker system tailored to your unique preferences. Effortlessly adapt to different audio environments with a system that responds intelligently to your needs. Highlights • Four channel active filtering • Stereo input XLR & RCA • Stereo input FIR (2048 taps) or four mono output FIR (1024 tabs per channel) • Compatible with NCMP and NCAS series • Three programmable presets Features • Configurable Soft clip limiter • IIR & FIR capable • Programmable with Hypex Filter Design (HFD) • Automatic source selection • Automatic signal detection • Optional IR remote control Possible applications • High-end consumer audio • Stereo power and integrated amplifiers • Active loudspeakers • PA systems • Studio monitors